In scenarios such as small-scale waste recycling, processing of factory offcuts, and handling of solid waste from farms (such as straw and waste feed bags), users often encounter the pain points of “large equipment footprint, complex operation, and high cost”. Our single-axis shredder, with its compact design and efficient single-axis system, precisely matches the needs of small-scale processing and achieves “small space, low cost, high efficiency” operations. The core advantages directly address the users’ core demands:
1. Compact and flexible, deployable in small spaces
With a lightweight and compact body design, the entire machine occupies only 2-5㎡ (equivalent to the size of 1-2 office desks), and can be easily placed in corners of waste stations or factory workshops without the need for separate site planning. It supports two installation methods: fixed model can be directly used with wiring, and mobile model can be combined with swivel wheels (optional), allowing one person to push and adjust the position, suitable for the space limitations of small-scale scenarios.
2. Multi-material compatibility, no frequent parts replacement
The core adopts the “single-axis + adjustable cutter disc” structure, with the cutter disc spacing adjustable from 0.3-5cm, capable of stably shredding various small-scale materials: soft waste such as plastic bottles, woven bags, waste paper boxes, etc., wood offcuts, branches (diameter ≤ 10cm), etc., and solid waste from farms such as straw, waste feed bags, old bedding, etc. No need to replace the cutter disc or core components, one machine covers multiple types of solid waste processing needs.
3. High efficiency against blockage, matching small-scale demands
Equipped with 7.5-45kW motors (depending on production capacity), the single-axis rotates at a high speed with a shear force of 500kN, the crushing efficiency of hard materials (such as thick-walled plastic bottles) is 30% higher than that of ordinary small shredders, and the production capacity covers 0.5-8 tons: the small model (0.5-2 tons / hour) is suitable for daily waste station processing, and the medium model (3-8 tons / hour) meets the batch processing of small factories for offcuts. It is equipped with an “overload protection device”, automatically stops when the machine is overloaded, with a blockage rate of less than 0.8%, avoiding motor burnout.
4. Low-cost operation and maintenance, easy for beginners
Wear-resistant alloys are used for easy-to-wear parts (cutter disc, bearings), with a cutter disc lifespan of 3000 hours (ordinary steel only 1500 hours), replacement does not require professional tools, opening the side cover is enough to operate, maintenance time is shortened to 30 minutes / time. The overall energy consumption is low: the small model consumes only 8-12 kWh per hour, 20% more energy-efficient than similar equipment; the operation only requires “start – feed – stop” 3 steps, with clear indicator lights for prompts, beginners can independently operate after 10 minutes of training, reducing labor costs by 50%.
In addition, the equipment has passed CE and ISO 9001 certifications, and is equipped with a simple dust collection interface (can be connected to a small dust collector), with a dust concentration of ≤ 20mg/m³ during operation, meeting standards, small-scale users do not need to worry about environmental compliance issues.
