In scenarios such as industrial solid waste reduction, recycling of waste materials (such as plastics, metals, and wood), and pre-treatment of hazardous waste, the “material compatibility, anti-sticking ability, and product uniformity” of the dual-axis shredder directly determine the recycling efficiency and processing cost. Our dual-axis shredder, with its high-strength double-roller design and intelligent anti-block system, addresses the pain points of traditional single-axis equipment such as “being unable to shred hard materials, prone to jamming, and uneven product size”. Its core advantages precisely match industrial processing requirements:
1. Global material compatibility, capable of shredding 200+ categories
With a high-strength double-axis roller structure and “interlaced alloy discs”, it can stably shred various difficult-to-process materials: from soft materials like plastic films, woven bags, and waste paper, to medium-hard materials like thick-walled plastic barrels, used household appliance shells, wood scraps, to hard materials like aluminum alloy, thin iron sheets, and used battery shells (requiring custom anti-corrosion discs), even kitchen waste wet garbage with a moisture content of 30% and medical waste plastics (in line with hazardous waste treatment standards), without frequent replacement of discs, one machine covers multiple scenarios of recycling needs.
- High-efficiency anti-block, with a controllable production capacity of 8-50 tons per hour
Equipped with a dual-motor drive system, the double axes rotate synchronously in opposite directions, with a shear force of 1200kN, the hard material crushing efficiency is 50% higher than that of single-axis equipment, and the production capacity per machine covers 8-50 tons (adjustable according to the hardness of the materials). The jamming rate is less than 0.3%; combined with “adjustable disc gap” (0.5-5cm stepless adjustment), the product particle size uniformity reaches over 90%, no need for secondary crushing, directly compatible with subsequent granulation, landfill or incineration processes.
3. Wear-resistant and durable, maintenance cost reduced by 40%
Core components use high-maintenance materials: the disc is made of Cr12MoV alloy steel, processed by “quenching + low-temperature tempering”, with a surface hardness of HRC60-62, with a service life of up to 5000 hours (ordinary steel only 2000 hours); the torsional strength of the double-axis main shaft is increased by 35%, avoiding long-term high-load deformation. The equipment is overall equipped with “sealed bearing housing”, dust-proof, waterproof, and preventing material leakage, with a failure rate as low as 0.8%, maintenance cycle extended to once every 3 months, and the annual maintenance cost is 40% lower than similar equipment.
4. Intelligent compliance, compatible with environmental protection requirements
Novice users can master it in 15 minutes; equipped with a “dust collection interface”, it can directly connect to a pulse dust collector, with the dust concentration in the working environment ≤ 10mg/m³, meeting the GB 16297-1996 air pollutant emission standards. The equipment has passed CE and ISO 9001 certifications, and does not require additional modification for export to regions such as Europe and Southeast Asia; the material reduction rate after crushing reaches 80% (for example, plastic bottles from 1m³ to 0.2m³), significantly reducing transportation and storage costs.
