In scenarios such as garden pruning, orchard pruning, and municipal greening, the handling of tree branches often encounters the problems of “high transportation costs, disorderly stacking on site, and low processing efficiency”. Our mobile tree branch crusher, with its all-terrain mobile design and efficient crushing system, achieves “on-site crushing, immediate use”, and its core advantages directly address the core needs of outdoor tree branch processing:
1. All-terrain mobility, unrestricted on-site operation
The design features a dual-terrain chassis option: the crawler model has a climbing ability of up to 25°, capable of smoothly navigating through mountainous orchards and sloping gardens without getting stuck in mud or skidding; the tire model is equipped with 12-inch vacuum off-road tires, allowing for flexible operation on municipal roads and community green spaces, with a minimum turning radius of only 1.8 meters. The equipment is powered by a 48-75 horsepower diesel engine, with a full tank range of 8-12 hours, without the need for an external power source, directly driving to the site where tree branches are piled up for operation, saving the cost of transporting branches to a fixed site.
2. Efficient crushing, 15cm thick branches processed in seconds
Equipped with a dual-blade cutting + hammering crushing composite system, with an input port width of 30cm, it can directly input fresh branches, dead branches, and shrubs with a diameter of 15cm or less, without the need for pre-cutting. The crushing efficiency is 40% higher than that of traditional fixed equipment, with a single machine’s hourly production capacity covering 0.8-3 tons (adjusted according to the dryness and wetness of the branches), and the crushed product particle size of 3-10mm can be adjusted through a screen, directly used as garden mulch, organic fertilizer raw material, or biomass fuel, achieving “converting waste into resources on the spot”.
3.Environmental compliance, no dust or noise
An internal pulse dust removal device is installed, combined with a sealed feeding channel, with the dust concentration during operation ≤ 15mg/m³, in line with GB 16297-1996 air pollutant emission standards, avoiding traditional crushing’s dust pollution. Operations in residential areas and around schools will not disturb the residents. The material reduction rate after crushing is 80% (1 cubic meter of branches can be compressed to 0.2 cubic meters), reducing the amount of garbage to be transported, and meeting municipal environmental protection requirements.
4. Intelligent and easy operation, a novice can handle it alone
Equipped with a one-button start control panel, a novice can independently operate after 10 minutes of training. Built-in “overload intelligent protection”: when branches get stuck, the equipment automatically reverses for 3 seconds to discharge the material, then resumes operation, with a stuck machine rate of less than 0.5%; easily damaged parts (blades, screens) adopt quick-disassembly design, no need for professional tools, and can be replaced within 15 minutes, with the maintenance cycle extended to once every 300 hours, reducing maintenance costs by 30% compared to similar equipment.
